CROSMAN Prospect PCP rifle - .177 (19.9 Joule)

Characteristics of the PCP rifle

4.5 mm (.177) calibre shotgun, PCP (pre-charged pneumatic), operating by means of an internal "reservoir" of pre-compressed air, located under the barrel.

The handle is made of synthetic material that is resistant to wear, moisture and dirt (low maintenance).
Below the stock is the pressure gauge, which indicates the pressure of the rifle.

The barrel is made of rifled steel and the mechanical parts are made of metal alloy.
It has an integrated suprressor and is threaded.

It functions in "bolt action" (bolt mechanism): the arming is done thanks to a breech lever which will make it possible to push the lead in the barrel.

The magazine is removable and has a capacity of 12 shots.

It has a manual safety.

The Prospectrifle is not equipped with natural sights, but has a Picatinyrail (21 mm), on which to position a scope, a red dot sight...

Loading and shooting

• Pressurising with the hand pump: after removing the protective cap from the cylinder, connect the pump to the rifle, then fill it up slowly, checking the pressure regularly: 2000 PSI max (about 138 Bars).
• Loading the pellets : Insert the 12 pellets into the cylinder (head down, by rotating the lid), then slide it into the barrel from right to left, having first pulled the breech lock backwards.
• Arming: Pull the small lever (breech lock) backwards and then pull it forwards. The lead is engaged, the rifle is ready to fire.
• Once the first pellet has been fired, simply reset the breech bolt to engage the next pellet (according to the manufacturer's data, up to 90 pellets can be fired from a refill).

Plumb bob rifle delivered with

• a 12-shot barrel
• a 4x32 xcope
• a multilingual leaflet