ASG Dan Wesson 6'' CO2 revolver pack - Silver - .177 pellets (3 joules) - SPECIAL OFFER

ASG revolver features

• .177  bore, the Dan Wesson shoots pellets.
• It is full metal made, with a very realistic weight.
• The inner barrel is rifled
• The stock is made of ABS and ergonomic : fingers naturally take place, for an excellent and easy handling 
• The realism is increased with the use of (false) cartridges in the cylinder, where the pellets are loaded.
• The CO2 cartridge takes place in the stock and provides the energy.
• The Dan Wesson has an adjustable rear sight and a fixed front sight, to help the naked eye aiming. It also comes with a Picatiny rail that can be mounted on the barrel, allowing the addition of a red dot sight for example.
• The trigger is  double action : no need to cock the hammer or pull the trigger directly.
• It also has a manual safety system, with a button on the left side.

Loading the revolver

• CO2 cartridge 

The CO2 is located in the stock. Unmount the handle cover, pulling it back. Load the CO2 capsule in its compartment, head up, and turn the lock system to activate the CO2 (pshitt). Remount the CO2 handle cover, the revolver is ready.

• BB ammos 

Hyper-realistic, the Dan Wesson uses cartridges, that come in the cylinder.
Push the safety button to open the cylinder, that swings to the left.
Take the cartridges out, and fill each of them with a pellet, from the back side.
Put the cartridges back in the cylinder, and close it.
The revolver is delivered with a speed loader, that allows to load the 6 cartridges together in the cylinder.

Composition of the ready-to-pull kit

• The Dan Wesson 6" silver revolver 
• A speedloader and 6 cartridges 
• A picatiny rail and its key 
• A transport / storage case
• 5 CO2 cartridges
• 250 pellets
• 10 paper targets 14 x 14 cm